Akwụkwọ Paịpụ 3mm/5mm/10mm nwere ihe nrapado onwe ya

Akwụkwọ Paịpụ 3mm/5mm/10mm nwere ihe nrapado onwe ya

Nkọwa Dị Mkpirikpi:

Ngwaahịa PVC Foam Board Ihe eji emepụta PVC Nha 1220*2440mm, 1220*3050mm, 1560*3050mm, 2050*3050mm, wdg. Ọkpụrụkpụ 1-30mm Agba Ọcha, Ojii, wdg. Njupụta 0.33-0.9g/cm3. Ụdị PVC Foam Board, PVC Crust Foam Board, Co-extrusion PVC Foam Board Tolerances +/- 0.03 na njupụta +/- 0.2 mm na ọkpụrụkpụ +/- 0 ruo +3mm na obosara +/- 0 ruo +3mm n'ogologo. Ngwa 1. MGBASA OZI: mbipụta ihuenyo ọkachamara, ihe ngosi, bọọdụ nkọwa, akara agba, ide ihe. 2. TRANSP...

Zitere anyị ozi-e

Nkọwa Ngwaahịa

Akara Ngwaahịa

Ngwaahịa	Akwụkwọ ụfụfụ Board
Ibu akwụkwọ	110gsm, 120gsm, 130g, 150gsm, 210gsm
Ọkpụrụkpụ	3mm 5mm 10mm
Nha	7001000mm 12202440mm,1520*3050mm,Emebere ya nke ọma
Azụ	Na-enweghị ihe nrapado ma ọ bụ otu akụkụ nwere ihe nrapado
Agba	Ọcha, oji, ọbara ọbara, odo, acha anụnụ anụnụ, akwụkwọ ndụ akwụkwọ ndụ wdg.

Nkọwapụta

1. Dị fechaa, Ebufe ya ngwa ngwa ma hazie ya nke ọma;

2. E biri ya nke ọma ma dịkwa mfe ibipụta ma jiri ụdị agba dị iche iche mee ihe nkiri;

3. Ezigbo Plastik, Ihe na-eme ka thermoforming dị mma;

4. Mmetụta Dị Elu na Ọkụ Na-adịghị Agba Ọkụ;

5. Mgbochi nje kemịkalụ, anaghị egbu egbu;

6.Ọ naghị egbochi mmiri,Ọ naghị egbochi mmiri ma ọ bụ chekwaa okpomọkụ nke ọma;

7. Mkpuchi ụda dị mma na ịmịkọrọ ujo;

8. Na-anaghị agbaze ma na-egbochi ịka nká;

9. Ọtụtụ ụzọ esi ahazi ihe dịka igwu ala, ịkpụ osisi, ịkụ mbọ aka, nhazi ihe, simenti, ijikọ ihe. wdg.

Ngwa

1) Ihe mgbaze
2) Ihe mgbaze gburugburu ebe obibi
3) Mbipụta UV
4) Mbipụta ihuenyo
5) Ndepụta na ide ihe na kọmputa
6) Ịkpọsa mgbasa ozi
7) Mbadamba ngosi
8) Mbadamba akara
9) Mbadamba akwụkwọ foto